PCI-AC48
- Спецификации:
PCI-AC48
Computer Interface
32-bit, 33 MHz PCI bus, PCI Specification Revision 2.2
Ports
Two serial ports, configurable for the following:
• Two ports when used in RS-485 2-wire mode, or
• One port when used in RS-485 4-wire modeIsolation
2,500 VAC transient
Communications
RS-485 2-wire or 4-wire operation
Baud Rates
Serial link to 460,800 baud
Cable Length Distance
Up to 3,000 ft. (915 m)@ 115,200 baud
Termination
200 Ohm termination for RS-485 and IRQ
(DIP switch configurable)Biasing
RS-485 pull-up/pull-down biasing (DIP switch configurable)
Indicators
Transmit, Receive, and IRQ LEDs for each serial port
System Requirements
for Software DriverMicrosoft Windows 2000 SP4 and Windows XP Professional (32-bit)
Power Requirements
5 VDC @ 600 mA
Operating Temperature
Storage Temperature0 °C to 70 °C
–30 °C to 85 °CHumidity
95% relative humidity, non-condensing
PCI-AC48 - это изолированная высокоскоростная адаптерная карта, предназначенная для соединения последовательных устройств RS-485, таких как устройства Opto 22 или устройства ввода-вывода Optomux, с компьютерами, использующими шину PCI для подключения периферийных компонентов.
Эта карта адаптера предназначена для клиентов, которые использовали адаптерную карту Opto 22 AC37, но должны обновиться до более нового компьютера, который использует шину PCI вместо шины ISA.
PCI-AC48 обеспечивает управление на базе ПК для блоков ввода / вывода B3000-B и B3000 или модулей ввода-вывода Optomux E1, E2, B1 и B2.
Используйте эту карту с помощью адаптера AC28 и PCI-AC48 Card Toolkit. Набор инструментальных средств совместим с Windows 2000 / XP.
- Спецификации
-
PCI-AC48
Computer Interface
32-bit, 33 MHz PCI bus, PCI Specification Revision 2.2
Ports
Two serial ports, configurable for the following:
• Two ports when used in RS-485 2-wire mode, or
• One port when used in RS-485 4-wire modeIsolation
2,500 VAC transient
Communications
RS-485 2-wire or 4-wire operation
Baud Rates
Serial link to 460,800 baud
Cable Length Distance
Up to 3,000 ft. (915 m)@ 115,200 baud
Termination
200 Ohm termination for RS-485 and IRQ
(DIP switch configurable)Biasing
RS-485 pull-up/pull-down biasing (DIP switch configurable)
Indicators
Transmit, Receive, and IRQ LEDs for each serial port
System Requirements
for Software DriverMicrosoft Windows 2000 SP4 and Windows XP Professional (32-bit)
Power Requirements
5 VDC @ 600 mA
Operating Temperature
Storage Temperature0 °C to 70 °C
–30 °C to 85 °CHumidity
95% relative humidity, non-condensing
Наличие на складах
-
Склад - Санкт-Петербург
остаток: 0